1. Regarding the Product:
The Safe-T-Punch™ tip penetrates the toughened safety glass and initiates the automatic self-destruction of the entire toughened glass pane.
NO, Safe-T-Punch™ is designed to only break Toughened Safety Glass – Usually side windows and back windows, these windows’ glass are permanently marked as to their type. Do not use on forward facing windscreens, these are always laminate glass.
By in a scientific manner piercing the compression layer found on the surface of all Toughened Safety Glass that conforms to UN ECE R43 or similar glass standard.
It has designed resistance to removal and tampering.
The EVP ring of the STP50FA and the STP50FS makes it very difficult to remove without the use of tools.
Yes. But at this stage, only for the STP50FA. The cover prevents tampering and adds extra protection.
Each device can be track and traced to its batch material recorded reports.
As part of our certified ISO9001:2015 Quality Management System each component and the complete device is 100% verified prior to being assembled and made available for sale. Each Safe-T-Punch™ life saving device is quality tested.
Yes, FEMA, DFMEA and FMECA studies were performed on all Safe-T-Punch™ product designs.
Yes, we tested it for the Royal Coastguard on 8mm thick toughened glass used for the bridge windows of their marine vessels and workboats.
South Africa as a result of the Westdene bus disaster in 1985 when the bus was submerged in the dam
Surviving witnesses stated that the emergency exits did not operate as they were supposed to
Ivan de Villiers le Roux in late 1989 and first patented in 1991
Yes, Safe-T-Punch™ is tested from -40˚C to +90˚C. The adhesive if fire-proof and will keep the device affixed to the glass even if the vehicle is on fire and burning.
Yes all parts are anodised or made from stable synthetic materials.
2. Regarding compliance:
Yes. By the National Regulator of Compulsory Specifications (NRCS) in South Africa, the Vehicle Certification Agency (VCA) in the UK and many other competent authorities (EU, USA, NZ, ZA, UK, CA).
Yes
UN ECE R107, FMVSS 217, ADR 44, ISO 3537 and the ZA Regulation 252.
No. In order to qualify as a device any product, submitted during homologation of the complete vehicle model prior to mass production, would be evaluated on an individual basis by the competent authority. This evaluation process is standardised.
Previous submissions to competent authorities and their acceptance of Safe-T-Punch™ as a device was achieved by submitting the information as per the requirements for homologation of a vehicle safety critical part. These requirements for individual approval as fit for purpose are detailed in the documentation of the relevant competent authority. There requirements are universal.
“In order to homologate a vehicle a sample must be supplied for evaluation, supported by a large body of documented evidence provided by the original manufacturer, including inspection and test reports compiled by recognised laboratories or inspection authorities. The evidence must cover the characteristics of the complete vehicle, as well as all components referred to in the applicable standards and codes of practice.”
National Regulator of Compulsory Specifications
(NRCS) South Africa.Yes. Subject to text and layout approval. Translation to be signed off by the customer prior to production.
Each device can be track and traced to its batch material recorded reports.
3. Regarding Sales:
Wright Bus, VDL, Safe-T-System, Punch Systems, PG Glass, Widney Transport Components, Alexander Dennis, Geemac, Worksafe BC, Baus, Sena Windows, MAN, Angelo Kater, Iveco, CNH Industrial, Nobina, BYD, Busmark, Van Hool, Marcopolo, JHB Metro Bus, Unitrans, PSV Glass, Volvo, MCV, Irizar, Caetanobus, TFL Scania, Ekurhuleni, Irizar, otokar, Daimler Benz, Arriva, Plaxton, Optare
See our extensive benefits and advantages list
a) ILR Safety CC is ISO 9001:2015 Certified.
b) The simplicity of integrating and applying the technology.
c) The transfer of responsibility of the emergency exit device to ILR Safety CC its manufacturer.
d) We solve a problem for the OE.
e) Its use saves money and time.
f) We are a transparent company with a clear company Quality Policy Statement.
g) Made in South Africa who has trader agreements namely AGOA, EU/TDCA, GSP, SADC and EFTA
h) Price.
I) We are specialists with deep knowledge on the subject of Emergency Windows, Devices and the Regulations.
j) The product is fit for purpose
Yes
Our friendly after sales service team is available to answer any question that you may have.
Yes. Tags and replacement instructions are available. However every new device supplied will be complete ready for installation.
Yes. All Safe-T-Punch™ devices are warranted against defective materials or workmanship. We have records of deployed devices with a service life spanning more than 15 years.
Yes. In the event of a broken window the STP40N and STP30N devices can be cleaned, refurbished with new adhesive and redeployed. The STP50FA device will need to be refurbished in our factory.
Yes, the customer has to approve the text prior to print.
This is our industrial device suitable for difficult to break curved glass and can be retrofitted to existing double glazing window assemblies.
Yes, we tested it for the Royal Coastguard on 8mm thick toughened glass used for the bridge windows of their marine vessels and workboats.
Yes we have a self-service type counter display box – 20 x STP50FA devices each individually packed ready to install in a self-contained clamshell packet.
Yes, COD EX WORKS ZA as per our list price.
Yes, Punch Systems, Fastenal, PLR Distribution, Geemac and Sena Windows.
4. Regarding Use:
Please see our list of uses of this remarkable technology.
Yes. The device is designed to be operated by hitting it repeatedly with a bare hand. Readily Breakable Safety Glass breaks into harmless cubes and is recognised and standardised as being safe to handle without causing injury.
It is designed to break toughened safety glass conforming to UN ECE R43 or similar. Safe-T-Punch™ excels in performance when fitted to Readily Breakable Safety Glass.
Safe-T-Punch is tested on 8mm toughened glass.
A person can generate about 3 Joules of energy with a single hand strike. This force is sufficient in order to break toughened glass when applied to an installed Safe-T-Punch™ device. A deliberate and intended strike is required. It can be struck repeatedly until the glass breaks.
You are more than welcome. We only insist that the installation or test rig used be representative of an installed compliant Emergency Window. Loose glass/fitment negatively influences the performance of the test.
After use or forced removal the device will require refurbishment before re-use.
Yes, we have a fire station chief’s statement on record. The Elarduskloof incident.
To achieve best performance, the best position or location is if the device is fitted within 200mm from any edge of the securely fitted toughened glass pane.
All toughened glass is permanently marked as to its type. Search for the logo/emblem and standardised marking (R43) around the perimeter of the glass.
Yes.
Check for suitable adhesion of the device to the specific type of film fitted to the glass. Anti- graffiti film is not suitable as it shrugs off adhesive and paint. A different installation method may be used under these circumstances which would involve cutting a hole in the film and fitting the device directly onto the glass.
Yes.
Only if installed during manufacture of the window assembly. See the amazing ability to “stack” these devices. With an overall height the STP50FA and its double glazing companion, the STP40F, is only 9mm each. This makes for easy fitment of the device in a double-glazed assembly with a minimum airgap of 10mm. Each toughened glass pane of a double glazed emergency window is fitted with a device, exactly as per the UN ECE R107 regulation.
No, just a daily pre trip visual inspection to ensure completeness of the installation. Tags and instructions stickers are available as spares should replacement be necessary.
It is designed to operate within the abilities of a 12 year old adolescent female.
Yes, the safety tag disables the device when not in use.
Hit the device repeatedly in order to break the safety glass. Some panes of glass break easier than others.
Side and rearward facing windows made from UN ECE R43 compliant breakable safety glass, and that conforms to UN ECE R107 Emergency Window requirements for size (700mm by 500mm), location and access.
This is the glass type called for in the regulations and is specific to Emergency Windows and Escape Hatches.
NO, Do not fit to laminate glass.
Yes. Being a scientific device with a repeatable simple test procedure, Safe-T-Punch™ can be used to verify the aptness and to ensure that the supplied glass is readily breakable.
Visually inspect all devices for damage and completeness. For the STP30N and STP40N simply rotate the button, if it moves freely the device is good for service. For the STP50FA device, remove the safety tag and gently press the strike surface. There should be a little movement and then the tip will contact the glass. Refit the safety tag.
No. The extreme low profile and bevelled EVP ring of the STP50FA makes it near impossible to remove without the use of tools.
Yes.
Yes our STP40NX model is extensively used for this purpose on plant and machinery.
5. Regarding the Price:
Please contact us
Prices may be negotiated
6. Regarding the Company and Service:
South Africa
Yes. ISO9001:2015
We have fault reporting and customer satisfaction surveys as part of our ISO procedures.
Yes
As per our standard packing list or custom per agreed customer requirements.
EX WORKS COD
Johannesburg South Africa.
A courier quote will be provided at the time of ordering
Yes either in person or via video instruction.
We can assist in small scale local installations only. The device is made to be easily fitted by the person who has purchased it.
Please send us photos and we can evaluate the suitability of the location, access and glass type of the installation prior to fitment.
Yes certainly. We have 30 years of Safe-T-Punch™ and emergency window experience to share.
From PLR Distribution Pty Ltd South Africa or its appointed agents.
Yes. All manufacturing waste is recycled. The STP device is also recyclable.
ILR Safety CC South Africa holds all rights to the Safe-T-Punch™ device including patens, trademark and design registrations.